الخطوات بالصورSteps in pictures

- 1تجميع قطاعات المجرى وإحكام الفلنشاتDuct sections assembled and sealed at flanges
- 2تعليق المجرى بأسياخ على مسافات منتظمةDucts hung from the slab with threaded rods at regular spacing
- 3لف العزل وتثبيتهInsulation wrapped around the duct and sealed with tape
- 4تثبيت الفتحة واختبار تدفق الهواءAn air grille fixed to the duct and a paper strip held in the airflow to test it
مجاري هواء من الصاج المجلفن لتوزيع وسحب الهواء، مع دامبرات لضبط الكمية، ومراوح In-line للشفط أو الدفع، ولوفرات ومخارج تهوية.
Galvanised sheet-metal ducts to supply and extract air, with dampers to set the airflow, in-line fans for extract or supply, and louvres and vents.
حوامل وأسياخ تعليق؛ مادة إحكام للوصلات (Duct sealant)؛ عزل حراري للمجاري الباردة؛ دامبرات؛ وصلات مرنة؛ لوفرات وجريلات.
Brackets and hanger rods; duct sealant for joints; thermal insulation for cold ducts; dampers; flexible connectors; louvres and grilles.
قبل البدءBefore starting
نقطة إيقافHold pointاعتماد مسارات المجاري ومقاساتها وأماكن المخارج على المخطط وتنسيقها مع الإضاءة والجبس؛ التأكد من وجود مساحة كافية في السقف المعلق؛ اعتماد مخرج الطرد للخارج.
Approve duct routes, sizes and outlet positions on the drawing and coordinate them with lighting and gypsum work; check there is enough space in the suspended ceiling; approve the exhaust outlet to the outside.
الخطواتSteps
- تصنيع القطاعات والأكواع وفق المقاسات
- تثبيت أسياخ التعليق في السقف الخرساني على مسافات منتظمة
- تعليق المجاري وربط الوصلات وإحكامها بمادة الإحكام، ثم العزل الحراري حيث يلزم
- تركيب الدامبرات والمروحة مع وصلة مرنة بينها وبين المجرى لمنع نقل الاهتزاز
- تركيب اللوفرات والجريلات بعد الجبس، وضبط الدامبرات وقياس التدفق
- Fabricate the duct sections and bends to size
- Fix hanger rods into the concrete slab at regular spacing
- Hang the ducts, join and seal the joints, then insulate where needed
- Install the dampers and the fan, with a flexible connector between the fan and the duct to stop vibration travelling
- Install louvres and grilles after the gypsum work, set the dampers and measure the airflow
خلّي بالكWatch out
عدم تعليق المجاري على قطاعات الجبس؛ ترك فتحات صيانة للمروحة والدامبرات؛ اتجاه المروحة مطابق لاتجاه التدفق.
Never hang ducts from gypsum profiles; leave access panels for the fan and dampers; the fan must face the direction of flow.
الاستلامAcceptance
نقطة قبولAcceptance pointلا تسريب ظاهر ولا صوت أو اهتزاز؛ الدامبرات تعمل؛ فتحات الصيانة متاحة.
No visible leaks and no noise or vibration; dampers work; access panels reachable.
عيوب شائعةCommon defects
تكثيف وتنقيط من مجاري غير معزولة؛ صفير من وصلات غير محكمة؛ مروحة بلا فتحة صيانة.
Condensation dripping from uninsulated ducts; whistling from unsealed joints; a fan with no access panel.
عايز بنية تنفّذ؟Want Bunyh to do it?فريق Bunyh Contracting بينفّذ بنفس الخطوات ونقاط الفحص دي.Bunyh Contracting executes with these same steps and checks.
اطلب معاينةRequest a site visitعايز مهني موثّق ينفّذ؟Need a verified professional?تطبيق بنية بيوصّلك بمهنيين موثّقين وعروض أسعار تقدر تقارنها.The Bunyh app connects you with verified professionals and quotes you can compare.
سجّل اهتمامكJoin the waitlist
