1

الخطوات بالصورSteps in pictures

بانوهات وكرانيش الفيوتك
  1. 1تعليم الخطوطMarking guide lines on the wall with a laser
  2. 2قص القطع بزاوية دقيقةCutting pieces to length with a mitre box and saw
  3. 3لصق القطعة وضبطها بالميزانAdhesive applied on the back and the piece pressed on the wall and checked with a level
  4. 4ملء الفواصل والصنفرة قبل الدهانJoints filled with filler and sanded before painting
التعريفDefinition

عناصر ديكور جاهزة من الفيوتك (بانوهات حائطية وكرانيش سقف وأفريز) تُثبت على الحوائط والأسقف ثم تُدهن.

Ready-made polyurethane (Futec) decorative elements (wall panels, ceiling cornices and friezes) fixed to walls and ceilings and then painted.

الموادMaterials

قطع الفيوتك المعتمدة؛ لاصق المورد المخصص؛ مسامير خفيفة أو دبابيس؛ معجون؛ سيليكون قابل للدهان؛ برايمر ودهان.

Approved Futec pieces; the supplier's dedicated adhesive; light nails or pins; filler; paintable silicone; primer and paint.

2

قبل البدءBefore starting

نقطة إيقافHold point

اعتماد الموديلات وأماكنها على مسقط الحوائط والأسقف؛ الحائط معجن وجاف ومستوٍ؛ تعليم الخطوط بالليزر قبل التركيب.

Approve the models and positions on the wall and ceiling elevations; wall filled, dry and flat; mark the lines with a laser before fixing.

3

الخطواتSteps

  1. تعليم الخطوط الأفقية والرأسية للبانوهات وخط الكرنيش بالليزر
  2. قص القطع بزوايا 45 درجة في صندوق زوايا أو منشار زوايا
  3. دهان اللاصق على ظهر القطعة وتثبيتها على الخط مع مسامير خفيفة حتى يجف اللاصق
  4. ملء الفواصل والزوايا بالمعجون أو السيليكون القابل للدهان وتنعيمها
  5. الصنفرة الخفيفة ثم البرايمر والدهان
  1. Mark the horizontal and vertical lines of the panels and the cornice line with a laser
  2. Cut the pieces at 45° in a mitre box or mitre saw
  3. Apply adhesive to the back of the piece and fix it on the line, with light nails until the adhesive sets
  4. Fill joints and corners with filler or paintable silicone and smooth them
  5. Sand lightly, then prime and paint
4

خلّي بالكWatch out

عدم التركيب على حائط رطب أو سطح دهان قديم ضعيف؛ اللاصق المستخدم هو الموصى به من المورد.

Do not fix to a damp wall or a weak old paint surface; use the adhesive the supplier recommends.

5

الاستلامAcceptance

نقطة قبولAcceptance point

استقامة الخطوط والزوايا ملتحمة؛ لا فراغات بين القطعة والحائط؛ التثبيت محكم؛ الدهان نظيف وموحد.

Straight lines and closed mitres; no gaps between piece and wall; firmly fixed; clean, uniform paint.

6

عيوب شائعةCommon defects

ظهور الفواصل بعد الدهان؛ زوايا مفتوحة؛ انفصال القطع عن الحائط.

Joints showing after painting; open mitres; pieces coming away from the wall.

عايز بنية تنفّذ؟Want Bunyh to do it?فريق Bunyh Contracting بينفّذ بنفس الخطوات ونقاط الفحص دي.Bunyh Contracting executes with these same steps and checks.

اطلب معاينةRequest a site visit

عايز مهني موثّق ينفّذ؟Need a verified professional?تطبيق بنية بيوصّلك بمهنيين موثّقين وعروض أسعار تقدر تقارنها.The Bunyh app connects you with verified professionals and quotes you can compare.

سجّل اهتمامكJoin the waitlist
تنبيه. الدليل ده إرشادي عام علشان تفهم الشغل بيتعمل إزاي وتستلمه إزاي. مش بديل عن مهندس مختص، ولا عن مواصفات مشروعك وتعليمات المورّد للمنتج اللي هتستخدمه.Note. This guide is general guidance to help you understand how the work is done and how to inspect it. It does not replace a qualified engineer, your project specifications, or the supplier instructions for the product you use.
اقترح طريقة أحسنSuggest a better way8.3 · بانوهات وكرانيش الفيوتكFutec wall panels and cornices
مهندس بنية المختص بيراجع كل اقتراح قبل ما يتنشر.A Bunyh engineer reviews every suggestion before it is published.