1

الخطوات بالصورSteps in pictures

الدهانات الداخلية (بلاستيك أكريليك)
  1. 1تنظيف السطح وكشط التالفA worker scraping and cleaning the wall surface
  2. 2معالجة الشروخ بالمعجونCracks and defects filled with putty using a spatula
  3. 3الصنفرة والبرايمرThe wall sanded and primer rolled on
  4. 4الأوجه النهائية وفحص السطح بضوء مائلFinal coats applied with a roller, tape removed, the wall checked with a raking light
التعريفDefinition

تشطيب الأسطح بطبقات دهان لحمايتها وإعطائها اللون النهائي، ويضم الدهان الجديد وصيانة الدهان القديم.

Finishing surfaces with coats of paint to protect them and give the final colour, covering new painting and the repair of old paint.

الموادMaterials

سيلر/برايمر، معجون، دهان أكريليك قابل للغسيل، ورق صنفرة، شريط لاصق.

Sealer/primer, filler, washable acrylic paint, sandpaper, masking tape.

2

قبل البدءBefore starting

نقطة إيقافHold point

تغطية الأرضيات والأبواب والأجهزة؛ اعتماد لون وعينة (لوح تجريبي) مع العميل قبل البدء.

Cover floors, doors and appliances; approve the colour on a sample panel with the client before starting.

3

الخطواتSteps

  1. تنظيف السطح وكشط الدهان التالف
  2. معالجة الشروخ والعيوب بمعجون إصلاح
  3. المعجون على أوجه مع صنفرة بينها
  4. تطبيق السيلر/البرايمر
  5. أوجه الدهان النهائية بالفرشاة والرولة أو الرش
  6. إزالة الشريط اللاصق بعد الجفاف الأولي.
  1. Clean the surface and scrape off damaged paint
  2. Fill cracks and defects with repair filler
  3. Apply filler coats with sanding between them
  4. Apply the sealer/primer
  5. Apply the final coats by brush and roller or spray
  6. Remove the masking tape after initial drying.
4

خلّي بالكWatch out

لا دهان على سطح رطب أو متسخ؛ حماية من الغبار؛ تهوية جيدة؛ استخدام دفعة لون واحدة (Batch) لكل جدار.

Never paint a damp or dirty surface; protect from dust; ventilate well; use one colour batch per wall.

ظروف التجديدRenovation conditions

إزالة الدهان القديم المنتفخ بالكامل؛ فحص مصدر الرطوبة قبل الدهان؛ مطابقة لون الدهان القديم عند الترميم الجزئي صعبة، والأفضل دهان الجدار كاملاً من ركن إلى ركن.

Remove blistered old paint completely; find the source of any damp before painting; matching old paint for partial repairs is hard, so it is better to paint the whole wall corner to corner.

5

الاستلامAcceptance

نقطة قبولAcceptance point

فحص تحت ضوء مائل لكشف التموج والعيوب؛ لا تقطيع أو سيلان أو آثار فرشاة؛ توحيد اللون؛ لا بقع أو غبار عالق؛ الحدود نظيفة عند التقاء الألوان. عدد الأوجه المحدد في العقد مطبق.

Inspect under raking light to find waviness and defects; no patchiness, runs or brush marks; uniform colour; no stains or trapped dust; clean lines where colours meet. The number of coats in the contract has been applied.

6

عيوب شائعةCommon defects

فقاعات ورطوبة، تقشر، آثار رول، اختلاف لمعان، شروخ تظهر بعد الدهان.

Bubbles and damp, peeling, roller marks, uneven sheen, cracks appearing after painting.

عايز بنية تنفّذ؟Want Bunyh to do it?فريق Bunyh Contracting بينفّذ بنفس الخطوات ونقاط الفحص دي.Bunyh Contracting executes with these same steps and checks.

اطلب معاينةRequest a site visit

عايز مهني موثّق ينفّذ؟Need a verified professional?تطبيق بنية بيوصّلك بمهنيين موثّقين وعروض أسعار تقدر تقارنها.The Bunyh app connects you with verified professionals and quotes you can compare.

سجّل اهتمامكJoin the waitlist
تنبيه. الدليل ده إرشادي عام علشان تفهم الشغل بيتعمل إزاي وتستلمه إزاي. مش بديل عن مهندس مختص، ولا عن مواصفات مشروعك وتعليمات المورّد للمنتج اللي هتستخدمه.Note. This guide is general guidance to help you understand how the work is done and how to inspect it. It does not replace a qualified engineer, your project specifications, or the supplier instructions for the product you use.
اقترح طريقة أحسنSuggest a better way8.1 · الدهانات الداخلية (بلاستيك أكريليك)Interior wall painting
مهندس بنية المختص بيراجع كل اقتراح قبل ما يتنشر.A Bunyh engineer reviews every suggestion before it is published.