1

الخطوات بالصورSteps in pictures

الرخام والكاونترات
  1. 1القياس بالموقع وعمل الشابلونTaking measurements on site with a tape and a template
  2. 2القص والتشكيل وتلميع الحواف بالورشةStone being cut, shaped and edge-polished in the workshop
  3. 3رفع اللوح وتثبيته على الأساس وضبطه بالميزانSlab lifted by two workers and set on cabinet supports with adhesive and checked with a level
  4. 4سد الفواصل بسيليكون مطابق والتلميعJoints sealed with matching silicone and the surface polished
التعريفDefinition

أسطح وكاونترات وعتبات من الرخام الطبيعي (مثل الأخضر الهندي) أو غيره، تُقص وتُشكّل وتُلمّع وتُركب بالأبعاد المعتمدة.

Surfaces, countertops and thresholds in natural marble (such as Indian green) or other stone, cut, shaped, polished and installed to the approved dimensions.

الموادMaterials

ألواح الرخام بالسُمك والتشطيب المعتمد (مصقول أو رملي Sandblasted مانع انزلاق للشاور)؛ لاصق/مونة؛ مادة تثبيت وسيليكون؛ مادة عزل/حماية للسطح (Sealer).

Marble slabs in the approved thickness and finish (polished, or sandblasted anti-slip for showers); adhesive/mortar; fixing agent and silicone; surface sealer.

2

قبل البدءBefore starting

نقطة إيقافHold point

مقاسات نهائية بعد تركيب الأساس (قياس بالموقع وليس من المخطط فقط)؛ تحديد مواضع فتحات الأحواض والخلاطات؛ اعتماد العينة والدفعة.

Final measurements after the base is built (measured on site, not only from the drawing); positions of sink and mixer cut-outs set; sample and batch approved.

3

الخطواتSteps

  1. القياس بالموقع
  2. القص والتشكيل والتلميع بالمصنع/الورشة
  3. توصيل مع حماية الحواف
  4. تجهيز الأساس
  5. تركيب بالمونة أو اللاصق مع ضبط المستوى
  6. ترويب أو سيليكون الفواصل
  7. تركيب الأحواض والخلاطات
  8. تطبيق مادة الحماية
  1. Measure on site
  2. Cut, shape and polish in the factory/workshop
  3. Deliver with the edges protected
  4. Prepare the base
  5. Install with mortar or adhesive and set the level
  6. Grout or silicone the joints
  7. Install sinks and mixers
  8. Apply the sealer
4

خلّي بالكWatch out

الرخام يتأثر بالتبقع والملوحة (Efflorescence) والبقع؛ استخدام مونة مناسبة لتفادي البقع؛ تجنب المواد الحمضية في التنظيف؛ التعامل بحذر مع الألواح (الكسر).

Marble is prone to staining, efflorescence and marks; use a suitable mortar to avoid stains; avoid acid cleaners; handle slabs carefully (breakage).

5

الاستلامAcceptance

نقطة قبولAcceptance point

استواء السطح وانتظام الحواف؛ لا شروخ؛ مطابقة العروق واللون للعينة؛ فتحات الأحواض والخلاطات مطابقة؛ ثبات التركيب؛ لا بقع.

Flat surface with even edges; no cracks; veining and colour match the sample; sink and mixer cut-outs match; firmly fixed; no stains.

6

عيوب شائعةCommon defects

تبقع من المونة، حواف مشطوفة، فرق لون بين القطع، فتحات غير مطابقة للحوض.

Mortar stains, chipped edges, colour differences between pieces, cut-outs that do not fit the sink.

عايز بنية تنفّذ؟Want Bunyh to do it?فريق Bunyh Contracting بينفّذ بنفس الخطوات ونقاط الفحص دي.Bunyh Contracting executes with these same steps and checks.

اطلب معاينةRequest a site visit

عايز مهني موثّق ينفّذ؟Need a verified professional?تطبيق بنية بيوصّلك بمهنيين موثّقين وعروض أسعار تقدر تقارنها.The Bunyh app connects you with verified professionals and quotes you can compare.

سجّل اهتمامكJoin the waitlist
تنبيه. الدليل ده إرشادي عام علشان تفهم الشغل بيتعمل إزاي وتستلمه إزاي. مش بديل عن مهندس مختص، ولا عن مواصفات مشروعك وتعليمات المورّد للمنتج اللي هتستخدمه.Note. This guide is general guidance to help you understand how the work is done and how to inspect it. It does not replace a qualified engineer, your project specifications, or the supplier instructions for the product you use.
اقترح طريقة أحسنSuggest a better way7.2 · الرخام والكاونتراتMarble and countertops
مهندس بنية المختص بيراجع كل اقتراح قبل ما يتنشر.A Bunyh engineer reviews every suggestion before it is published.