1

الخطوات بالصورSteps in pictures

التشطيب: المفاتيح والإضاءة (Track Light / LED)
  1. 1بعد الدهان: تجريد الأسلاك وتوصيل المفتاحA worker stripping wire ends and connecting them to a switch after painting
  2. 2تثبيت الإطار بمنسوب أفقيA switch plate being fixed level using a small spirit level
  3. 3فتحة السبوت وتركيب الدرايفر والإضاءةA spotlight cut-out in the ceiling with an LED driver and the light being clipped in
  4. 4اختبار البرايز والإنارة بجهاز الفحصA worker testing a socket with a tester and checking each light
التعريفDefinition

تركيب المفاتيح والبرايز ووحدات الإضاءة (سبوتات، تراك لايت، شرائط LED) على نقاط التأسيس بعد الدهان.

Installing switches, sockets and light fittings (spotlights, track lights, LED strips) on the rough-in points after painting.

2

قبل البدءBefore starting

نقطة إيقافHold point

انتهاء الدهان؛ اعتماد موديلات المفاتيح والإضاءة ودرجة حرارة اللون؛ فحص كل نقطة تأسيس واستمرارية الأسلاك.

Painting finished; switch and light models and colour temperature approved; every rough-in point and its wiring continuity checked.

3

الخطواتSteps

  1. بعد الدهان: تركيب المفاتيح والبرايز بمناسيب موحدة
  2. تركيب الشريط الإضاءة LED مع محول مناسب
  3. تركيب وحدات Track وضبط اتجاهاتها
  4. تشغيل كل نقطة
  1. After painting: install switches and sockets at consistent levels
  2. Install the LED strip with a suitable driver
  3. Install the track units and set their directions
  4. Switch on every point
4

خلّي بالكWatch out

حماية الشاشات والأجهزة؛ عدم تحميل الدوائر أكثر من سعتها؛ فصل التيار أثناء التركيب.

Protect screens and appliances; do not load circuits beyond their capacity; isolate the power while installing.

5

الاستلامAcceptance

نقطة قبولAcceptance point

كل نقطة تعمل؛ لا وميض أو طنين؛ التركيب مستوٍ ومتعامد؛ مطابقة موديلات الإضاءة للمعتمد؛ الكفالة والأوراق للعميل.

Every point works; no flicker or buzzing; fittings level and square; light models match the approved ones; warranty and documents handed to the client.

6

عيوب شائعةCommon defects

مفاتيح مائلة، فرق في درجة اللون بين وحدات LED، محولات ساخنة بدون تهوية.

Crooked switches, colour differences between LED units, hot drivers with no ventilation.

عايز بنية تنفّذ؟Want Bunyh to do it?فريق Bunyh Contracting بينفّذ بنفس الخطوات ونقاط الفحص دي.Bunyh Contracting executes with these same steps and checks.

اطلب معاينةRequest a site visit

عايز مهني موثّق ينفّذ؟Need a verified professional?تطبيق بنية بيوصّلك بمهنيين موثّقين وعروض أسعار تقدر تقارنها.The Bunyh app connects you with verified professionals and quotes you can compare.

سجّل اهتمامكJoin the waitlist
تنبيه. الدليل ده إرشادي عام علشان تفهم الشغل بيتعمل إزاي وتستلمه إزاي. مش بديل عن مهندس مختص، ولا عن مواصفات مشروعك وتعليمات المورّد للمنتج اللي هتستخدمه.Note. This guide is general guidance to help you understand how the work is done and how to inspect it. It does not replace a qualified engineer, your project specifications, or the supplier instructions for the product you use.
اقترح طريقة أحسنSuggest a better way4.3 · التشطيب: المفاتيح والإضاءة (Track Light / LED)Installing switches, sockets and lighting
مهندس بنية المختص بيراجع كل اقتراح قبل ما يتنشر.A Bunyh engineer reviews every suggestion before it is published.