1

الخطوات بالصورSteps in pictures

التأسيس الكهربي
  1. 1تعليم المسارات والعلب بمنسوب موحدA worker marking socket box positions at uniform height with a laser level and a marker
  2. 2شق الحوائط وتثبيت العلبChasing the wall and fixing flush boxes at the same height
  3. 3تمرير الخراطيم وسحب الأسلاك بألوان محددةFlexible conduit laid in the chase with wires of different colors being pulled through
  4. 4فصل دوائر الإضاءة والقوى والتكييف وترقيمهاLighting, power and air-conditioning circuits run separately and wires labeled at the junction box
التعريفDefinition

مواسير وخراطيم وأسلاك وعلب تجميع مخفية داخل الحوائط والأسقف تغذي نقاط الإضاءة والقوى والتحكم.

Conduits, flexible conduit, wires and junction boxes concealed in walls and ceilings, feeding the lighting, power and control points.

الموادMaterials

خراطيم/مواسير حماية، أسلاك نحاس بمقاسات حسب الحمل (حسب مواصفات المشروع)، علب كهرباء، أسلاك أرضي.

Protective conduit/pipes, copper wires sized to the load (per project specification), electrical boxes, earth wires.

2

قبل البدءBefore starting

نقطة إيقافHold point

اعتماد مخطط توزيع النقاط (إضاءة، بريز، تكييف، تلفزيون، إنترنت) مع العميل؛ حساب أحمال الدوائر؛ تحديد ارتفاعات المفاتيح والبرايز.

Approve the point layout (lighting, sockets, AC, TV, internet) with the client; calculate circuit loads; set the heights of switches and sockets.

3

الخطواتSteps

  1. تعليم المسارات وأماكن العلب
  2. شق الحوائط وتثبيت العلب بمناسيب موحدة
  3. تركيب الخراطيم وسحب الأسلاك بألوان محددة (فاز، نيوترال، أرضي)
  4. فصل دوائر الإضاءة عن القوى وعن التكييف
  5. تجميع الأسلاك في علب التجميع بوصلات محكمة
  6. ترقيم الدوائر على اللوحة
  7. اختبار الاستمرارية والعزل قبل التغطية
  1. Mark the routes and box positions
  2. Chase the walls and fix the boxes at consistent levels
  3. Install the conduit and pull the wires in set colours (phase, neutral, earth)
  4. Keep lighting circuits separate from power and from AC
  5. Join the wires in junction boxes with secure connectors
  6. Number the circuits at the board
  7. Test continuity and insulation before covering
4

خلّي بالكWatch out

عدم وجود وصلات داخل الخراطيم؛ عدم تقاطع الكهرباء مع مواسير المياه بدون فاصل؛ لا أسلاك مكشوفة؛ مراعاة المسافات الآمنة.

No joints inside conduits; no electrics crossing water pipes without separation; no exposed wires; keep safe distances.

ظروف التجديدRenovation conditions

الأسلاك القديمة قد تكون ألمونيوم أو بمقاسات غير كافية؛ الأفضل استبدالها بدل التوصيل بها؛ وجود لوحة قديمة يستلزم إزالتها بعد نقل الدوائر.

Old wiring may be aluminium or undersized, so replacing it is better than connecting to it; an old board must be removed once its circuits are moved.

5

الاستلامAcceptance

نقطة قبولAcceptance point

مطابقة المخطط وعدد النقاط؛ ترقيم واضح؛ صور قبل التغطية.

Matches the layout and point count; clear numbering; photos before covering.

6

عيوب شائعةCommon defects

وصلات داخل الخراطيم، علب بمناسيب مختلفة، دوائر مزدحمة بالأحمال.

Joints inside conduits, boxes at different levels, overloaded circuits.

عايز بنية تنفّذ؟Want Bunyh to do it?فريق Bunyh Contracting بينفّذ بنفس الخطوات ونقاط الفحص دي.Bunyh Contracting executes with these same steps and checks.

اطلب معاينةRequest a site visit

عايز مهني موثّق ينفّذ؟Need a verified professional?تطبيق بنية بيوصّلك بمهنيين موثّقين وعروض أسعار تقدر تقارنها.The Bunyh app connects you with verified professionals and quotes you can compare.

سجّل اهتمامكJoin the waitlist
تنبيه. الدليل ده إرشادي عام علشان تفهم الشغل بيتعمل إزاي وتستلمه إزاي. مش بديل عن مهندس مختص، ولا عن مواصفات مشروعك وتعليمات المورّد للمنتج اللي هتستخدمه.Note. This guide is general guidance to help you understand how the work is done and how to inspect it. It does not replace a qualified engineer, your project specifications, or the supplier instructions for the product you use.
اقترح طريقة أحسنSuggest a better way4.1 · التأسيس الكهربيElectrical rough-in
مهندس بنية المختص بيراجع كل اقتراح قبل ما يتنشر.A Bunyh engineer reviews every suggestion before it is published.