الخطوات بالصورSteps in pictures

- 1رش الحائط بالماء والطرطشةA worker wetting the wall with water and throwing a thin splatter coat
- 2ضبط الأرشيدات رأسياً بالميزانGuide plaster strips set vertical on the wall and checked with a plumb level
- 3البطانة وتسويتها بالمسطرة بين الأرشيداتA plasterer filling between the strips and leveling with a long aluminium straightedge
- 4الضهارة بالإسفنجة ثم المعالجة بالرشA worker floating the finish coat with a sponge float then spraying water for curing
تسوية أسطح الحوائط بطبقات مونة لتجهيزها للدهان أو التكسية.
Levelling wall surfaces with coats of mortar to prepare them for paint or cladding.
الطرطشة (Splatter) ← البطانة (Scratch/Base coat) ← الضهارة (Finish coat). تُترك الطرطشة يومين قبل البطانة، وتُرش المحارة بالماء 3–4 أيام للمعالجة.
Splatter coat → scratch/base coat → finish coat. Leave the splatter coat two days before the base coat, and spray the plaster with water for 3–4 days to cure it.
قبل البدءBefore starting
نقطة إيقافHold pointاستلام التأسيسات (كهرباء، سباكة، تكييف) بعد الاختبارات؛ تثبيت الشبك المعدني على خطوط التأسيس التي تقطع الحائط (لتقليل الشروخ)؛ نظافة السطح ورطوبته؛ تحديد نقط المحارة (Screed points) بالمنسوب.
Services (electrical, plumbing, AC) accepted after testing; metal mesh fixed over service chases that cross the wall (to reduce cracking); surface clean and damp; screed points set to level.
الخطواتSteps
- رش الحائط بالماء
- الطرطشة بمونة سائلة نسبياً
- ضبط النقط والأرشيدات الرأسية بالميزان
- البطانة بين الأرشيدات وتسويتها بالمسطرة
- الضهارة بعد تماسك البطانة وتنعيم السطح بالإسفنجة أو الفرشاة
- المعالجة بالرش المتكرر
- Spray the wall with water
- Apply the splatter coat with a fairly wet mix
- Set the screed points and vertical guide strips with a level
- Apply the base coat between the guide strips and level it with a straightedge
- Apply the finish coat once the base coat has firmed up, and smooth the surface with a sponge or brush
- Cure by spraying repeatedly
خلّي بالكWatch out
الظروف الجوية (الحرارة والرياح تسرع الجفاف)؛ عدم المحارة على سطح جاف أو متسخ؛ التعامل مع الزوايا بأركان مستقيمة (دوغلة).
Weather (heat and wind speed up drying); never plaster onto a dry or dirty surface; form corners with straight edge beads.
الاستلامAcceptance
نقطة قبولAcceptance pointضرب المسطرة 2م على السطح والبحث عن تموج أو فراغ (رنين مفرغ عند الطرق)؛ لا شروخ ظاهرة؛ الأركان مستقيمة والفتحات متعامدة.
Run a 2 m straightedge over the surface and look for waviness or hollows (a hollow sound when tapped); no visible cracks; corners straight and openings square.
عيوب شائعةCommon defects
شروخ شعرية (قلة معالجة)، انفصال (سطح غير مبلل)، تموج، تغير لون (مونة غير موحدة).
Hairline cracks (too little curing), delamination (surface not wetted), waviness, colour variation (inconsistent mortar).
عايز بنية تنفّذ؟Want Bunyh to do it?فريق Bunyh Contracting بينفّذ بنفس الخطوات ونقاط الفحص دي.Bunyh Contracting executes with these same steps and checks.
اطلب معاينةRequest a site visitعايز مهني موثّق ينفّذ؟Need a verified professional?تطبيق بنية بيوصّلك بمهنيين موثّقين وعروض أسعار تقدر تقارنها.The Bunyh app connects you with verified professionals and quotes you can compare.
سجّل اهتمامكJoin the waitlist
