1

الخطوات بالصورSteps in pictures

المرايا
  1. 1القياس وتنظيف الحائطMeasuring the wall and cleaning it
  2. 2فرد لاصق المرايا رأسياًMirror adhesive applied in vertical strips
  3. 3تثبيت المرآة بالمثبتاتMirror pressed into place with clips
  4. 4تنظيف وفحص الانعكاسCleaning the mirror and checking reflection
التعريفDefinition

توريد وتركيب مرايا الحمامات والحوائط بفريم أو بدون فريم، مع إضاءة LED عند الحاجة.

Supplying and installing bathroom and wall mirrors, framed or frameless, with LED lighting when needed.

الموادMaterials

مرآة بالسمك المعتمد ومعالجة الحواف؛ لاصق مخصص للمرايا (لا يتلف طبقة الفضة)؛ مثبتات ميكانيكية (كلبسات أو حوامل)؛ فريم؛ إضاءة LED ومحول.

Mirror in the approved thickness with edge treatment; mirror adhesive (one that does not damage the silver backing); mechanical fixings (clips or ledges); frame; LED lighting and driver.

2

قبل البدءBefore starting

نقطة إيقافHold point

حائط مستوٍ وجاف؛ تأسيس كهرباء الإضاءة على المكان المعتمد؛ اعتماد مقاس المرآة بعد التبليط.

Wall flat and dry; lighting power roughed-in at the approved place; mirror size approved after tiling.

3

الخطواتSteps

  1. القياس النهائي وتعليم مكان المرآة بالليزر
  2. تثبيت الحامل أو الكلبسات السفلية على الخط
  3. وضع اللاصق نقاطاً أو خطوطاً رأسية على ظهر المرآة
  4. رفع المرآة على الحامل وضغطها على الحائط ثم تثبيت الكلبسات العلوية
  5. توصيل الإضاءة وتركيب الفريم وتنظيف السطح
  1. Take final measurements and mark the mirror position with a laser
  2. Fix the ledge or bottom clips on the line
  3. Apply adhesive in dots or vertical lines on the back of the mirror
  4. Lift the mirror onto the ledge, press it to the wall, then fix the top clips
  5. Connect the lighting, fit the frame and clean the surface
4

خلّي بالكWatch out

استخدام لاصق مخصص فقط؛ حواف مقاومة للرطوبة في الحمامات؛ شخصان على الأقل للمرايا الكبيرة.

Use only mirror adhesive; moisture-resistant edges in bathrooms; at least two people for large mirrors.

5

الاستلامAcceptance

نقطة قبولAcceptance point

لا تشوه في الانعكاس؛ لا خدوش ولا تبقع في الحواف؛ ثبات تام؛ إضاءة LED تعمل بلا وميض؛ المقاسات والمنسوب مطابقة.

No distortion in the reflection; no scratches or edge staining; completely firm; LED lighting works without flicker; size and level match.

6

عيوب شائعةCommon defects

بقع سوداء في حواف المرآة من لاصق غير مناسب أو رطوبة؛ ميل المرآة؛ وميض الإضاءة.

Black spots at the mirror edges from the wrong adhesive or moisture; mirror tilted; flickering light.

عايز بنية تنفّذ؟Want Bunyh to do it?فريق Bunyh Contracting بينفّذ بنفس الخطوات ونقاط الفحص دي.Bunyh Contracting executes with these same steps and checks.

اطلب معاينةRequest a site visit

عايز مهني موثّق ينفّذ؟Need a verified professional?تطبيق بنية بيوصّلك بمهنيين موثّقين وعروض أسعار تقدر تقارنها.The Bunyh app connects you with verified professionals and quotes you can compare.

سجّل اهتمامكJoin the waitlist
تنبيه. الدليل ده إرشادي عام علشان تفهم الشغل بيتعمل إزاي وتستلمه إزاي. مش بديل عن مهندس مختص، ولا عن مواصفات مشروعك وتعليمات المورّد للمنتج اللي هتستخدمه.Note. This guide is general guidance to help you understand how the work is done and how to inspect it. It does not replace a qualified engineer, your project specifications, or the supplier instructions for the product you use.
اقترح طريقة أحسنSuggest a better way10.3 · المراياMirror installation
مهندس بنية المختص بيراجع كل اقتراح قبل ما يتنشر.A Bunyh engineer reviews every suggestion before it is published.